cnruisen

The busbar insulation coating is made of silicone - fluorinated rubber at room temperature. After chemical polymerization with fluorine-containing materials, adding flame retardant, arc resistance, reinforcement, active agent and other materials for physical mixing. It not only has good insulation performance, flame retardant and thermal conductivity, but also in the curing process, fluorine-containing monomer structural units migrates to the surface of the insulation layer, so that the surfa...

The busbar insulation coating manufactured by Ruisen can be used to protect bare wire, busbar, cable, high-power generator, dry reactor, dry-type equipment and components that need insulation, heat conduction, flame retardant, moisture-proof and so on. It is very suitable for electrical equipment operating in polluted and humid environment.

Although it is not a new maintenance technique, busbar insulation coatings are coated with electric porcelain insulators t...

Product characteristics of busbar insulation coatings

1. The busbar insulation coating is made of special silicone rubber and other polymers with high performance.

2. Our silicone rubber insulation coating can protect the power system from explosion and other failures.

3. It is suitable for equipment or components that need insulation treatment, heat conduction, flame retardant and moisture-proof protection, such as bare wire, bare busb...

Organosilicon compound refers to the compound containing Si-O bond and at least one organic base is directly connected with silicon atom. It is also used to regard those compounds that connect organic base and silicon atom through oxygen, sulfur, nitrogen, etc. Among them, polysiloxanes with silicon oxygen bond (-Si-0-Si-) as the framework are the most numerous, the most deeply studied and the most widely used in organosilicon compounds, accounting for more than 90% of the total amount.

The zinc cold epoxy paint and the zinc rich epoxy primer are two kinds of very different materials in terms of process, technology and economy.

1. Corrosion resistance performance test: The zinc rich primer paint is resistant to salt spray for 600 hours (HG/ 3668); while the zinc cold epoxy paint is resistant to salt spray for more than 3,000 hours.

2. Moisture and heat r...

As the phenomenon of welding spatter is very common, the use of anti-spatter coating for welding is also very extensive. For general structural parts, the type of welding anti spatter coating has little effect, as long as it can effectively prevent welding spatter from adhering to the working surface in the welding process. However, for some key products and workpieces, such as high pressure ves...

Hollow insulator is a special insulating control, which can play an important role in overhead transmission lines.

Historical roots

In the early years, insulators were mostly used in poles, and gradually developed into high-voltage wire towers with a lot of disc-shaped insulators hanging at one end. It was designed to increase the creeping distance, usually made of glass or ceramics, called insulators.

Production method

The 

As the phenomenon of welding spatter is very common, the use of anti-spatter coating for welding is also very extensive. For general structural parts, the type of welding anti weld spatter coating has little effect, as long as it can effectively prevent welding spatter from adhering to the working surface in the welding process. However, for some key products and workpieces, such as high pressure...

A transmission line in Guangdong, China, and a power supply bureau maintenance engineer come to our factory, said they encountered a headache problem. Transmission lines get through farmland, the line is installed glass insulators. Since Flashover led insulator rupture, fragmentation of insulators scattered into the fields, local farmers stepped on broken glass, complaints Power Supply Bureau, not only caused discontent among the masses, but still give cause transmission security risks. For t...

We offer different kinds of Station Post Insulator for Substation, such as Circuit Breaker (CB), Post Insulator, Disconnector, Potential Transformer (PT), Surge Arrester, etc.

 

Contact us get more details about Station Post Insulator, such as TDS, Application Method, OEM etc.

 

We can supply different type of polymer station post insulators, also customer re...